ADTRAN 1000R Series show output-startup

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 263
show output-startup
Use the show output-startup command to display startup configuration output line-by-line. This output
can be copied into a text file and then used as a configuration editing tool.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 3.1 Command was introduced.
Usage Examples
The following is a sample output from the show output-startup command:
>enable
#show output-startup
!
#!
#hostname "UNIT_2"
UNIT_2#no enable password
UNIT_2#!
UNIT_2#ip subnet-zero
UNIT_2#ip classless
UNIT_2#ip routing
UNIT_2#!
UNIT_2#event-history on
UNIT_2#no logging forwarding
UNIT_2#logging forwarding priority-level info
UNIT_2#no logging emai l
etc....