ADTRAN 1000R Series resource pool-member <pool-name> [<cost>]

Command Reference Guide BRI Interface Configuration Command set

resource pool-member <pool-name> [<cost>]

Use the resource pool-member command to assign the interface to a resource pool, making it a demand

routing resource. Use the no form of this command to return to the default value.

Syntax Description

<pool-name> Specifies the name of the resource pool to whi ch this interface is assigned.

<cost> Optional. Specifies the cost of using this resource interface within the specified

pool. In the event of a tie, a resource with a lower cost will be selected first.

Interfaces with the same cost will be selected in alphabetical order by interface

name.

Default Values

By default, the interfa ce is not as sign e d to any reso ur ce pool .

Applicable Platforms

This command applies to the NetVanta 1000R, 3000, and 4000 Series units.

Command History

Release 11.1 Command was introduced.

Usage Examples

The following example configures a BRI interface as a member of resource pool MyPool:

(config)#interface bri 1/2

(config-bri 1/2)#resource pool-member MyPool