Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 226
The following is sample output from the show ip mroute all command:
>enable
#show ip mroute al l
IP Multicast Routing Table
Flags: S - Sparse, C - Connected, P - Pruned, J - Join SPT, T - SPT-bit Set,
F - Register, R - RP-bit Set
Timers: Uptime/Expires
(*, 225.1.0.1), 01:17:34/00:03:25, RP 192.168.0.25 4, Flags: SC
Forwarding Entry: Yes
Incoming interface: tunnel 2, RPF nbr 172.16.2.10
Outgoing interface list:
eth 0/1, Forward, 01:17:34/00:03:25