ADTRAN 1000R Series as-path-list <listname> [in | out]

Command Reference Guide BGP Neighbor Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 1285
as-path-list <listname> [in | out]
Use the as-path-list command to assign a predefined autonomous system (AS) path list to a BGP neighbor .
This list is then used to filter inbound and/or outbound BGP route updates. Use the no form of this
command to discontinue use of the list.
Syntax Description
<listname> Assigns an AS path list to this BGP neighbor.
in Specifies the filtering of all inbound BGP route updates.
out Specifies the filtering of all outbound BGP route updates.
Default Values
By default, no AS path lists are specified for filtering.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 9.3 Command was introduced.
Functional Notes
Before they can be assigned to a neighbor, AS path lists must first be defined using the ip as-path-list
command.
Usage Examples
The following example uses the no15 AS path list to filter all inbound BGP route updates:
(config)#router bgp-neighbor 192.22.73.101
(config-bgp-neighbor)#as-path-list no15 in