ADTRAN 1000R Series show ip policy-sessions <policyname> [all]

Command Reference Guide Enable Mode Command Set

show ip policy-sessions <policyname> [all]

Use the show ip policy-sessions command to display a list of current policy class associations. Refer to ip

policy-class <policyname> max-sessions <number> on page 437 for information on configuring access

policies.

Syntax Description

<policyname> Optional.

Displays policy class associations for a specific policy class.

all Displays all policy-sessions, including active associations (through which the

firewall is allowed to pass traffic) and associations flagged for deletion (through

which the firewall is forbidden to pass traffic). Associations flagged for deletion will

usually be freed within a few seconds of timeout or deletion, depe nding on p acket

congestion; servicing of packets is given priority. New traffic matching such an

association will create a new active association, provided the traffic still matches a

policy-class allow or NAT entry.

Default Values

No default value necessary for this command.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 3.1 Command was introduced.

Release 11.1 The All option was added.