ADTRAN 1000R Series

Command Reference Guide Frame Relay Sub-Interface Config Command Set

dial-backup auto-restore

Use the dial-backup auto-restore command to configure the interface to automatically discontinue

dial-backup when all network conditions are operational. Use the no form of this command to disable the

auto-restore feature. For more detailed information on Frame Relay dial-backup functionality, refer to the

Functional Notes and Technology Review sections of dial-bac kup call-mode [answer | answer-always |

originate | originate-answer | originate-answer-always] on page 876.

Syntax Description

No subcommands.

Default Values

By default, all backup endpoints will automatically restore the primary connection when the failure

condition clears.

Applicable Platforms

This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.

Command History

Release 1.1 Command was introduced.

Usage Examples

The following example configures the AOS to automatically restore the primary connection when the

failure condition clears:

(config)#interface frame-relay 1.16

(config-fr 1.16)#dial-backup auto-restore