ADTRAN 1000R Series ip firewall attack-log threshold <value>

Command Reference Guide Global Configuration Mode Command Set

ip firewall attack-log threshold <value>

Use the ip firewall attack-log threshold command to specify the number of attack mounting attempts the

AOS will identify before generating a log message. Use the no form of this command to return to the

default threshold.

Syntax Description

<value> Specifie s the number of attack mounting attempts the AOS

will identify before

generating a log message (valid range: 0 to 4,294,967,295).

Default Values

By default, the ip firewall attack-log threshold is set at 100.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 2.1 Command was introduced.

Usage Examples

The following example specifies a threshold of 25 attacks before generating a log message:

(config)#ip firewall attack-log threshold 25

The AOS security featur es must be enabled (using the ip firewall command) for the stateful

inspection firewall to be activated.