ADTRAN 1000R Series

Command Reference Guide HDLC Command Set

lldp send [management-address l port-description l

system-capabilities l system-description l system-name l

and-receive]

Use the lldp send command to configure this interface to transmit LLDP packets or to control the types of

information contained in the LLDP packets transmitted by this interface.

Syntax Description

management-address Enables transmission of management ad dress information on this interface.

port-description Enables transmission of port description information on this interface.

system-capabilities Enables transmission of this device’s system capabilities on this interface.

system-description Enables transmission of this device’s system description on this interface.

system-name Enables transmission of this device’s system name on this interface.

and-receive Configures this interface to both transmit and receive LLDP packets.

Default Values

Be default, all interfaces are configured to transmit and receive LLDP p ackets of all types.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 3000, 4000, and 5000 and Total Access 900 Series

units.

Command History

Release 9.1 Command was introduced.

Functional Notes

Individual LLDP inf or ma tio n can be enab led or dis ab led usin g th e va rio us form s of the lldp send

command. For example, use the lldp send and-receive command to enable transmit and receive of all

LLDP information. Then use the no lldp send port-description command to prevent LLDP from

transmitting port description information.