ADTRAN 1000R Series spanning-tree hello-time <seconds>

Command Reference Guide Global Configuration Mode Command Set

spanning-tree hello-time <seconds>

Use the spanning-tree hello-time command to specify the delay interval (in seconds) between hello

bridge protocol data units (BPDUs). To return to the default interval, use the no form of this command.

Syntax Description

<seconds> Specifies the delay interval (in seconds) between hello BPDUs.

Range: 0 to 1,000,000.

Default Values

By default, the delay is set to 2 seconds.

Applicable Platforms

This command applies to the NetVanta 300, 1000, 1000R, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 5.1 Command was introduced.

Usage Examples

The following example configures a spanning-tree hello- time interval of 10,000 seconds:

(config)#spanning-tree hello-time 10000