ADTRAN 1000R Series ip route-cache <address>

Command Reference Guide ATM Sub-Interfa c e Config Command Set

ip route-cache <address>

Use the ip route-cache command to enable fast-cache switching on the interface. Use the no form of this

command to disable fast-cache switching and return to process switching mode.

Syntax Description

No subcommands.

Default Values

By default, fast-cache switching is enabled on all Ethernet and virtual Frame Relay sub-interfaces. IP

route-cache is enabled for all virtual PPP interfaces.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 3000, and 4000 Series units.

Command History

Release 2.1 Command was introduced.

Release 8.1 ATM sub-interface was added.

Functional Notes

Fast switching allows an IP interface to provide optimum performance when processing IP traffic.

Usage Examples

The following example enables fast switching on the ATM sub-interface 1.1:

(config)#interface atm 1.1

(config-atm 1.1)#ip route- cache

Using Network Addr ess Translation (NA T) or the AOS fir ewall capabiliti es on an interface

requires process switching mode (using the no ip route-cache command).