ADTRAN 1000R Series clear counters vlan <vlan id>

Command Reference Guide Enable Mode Command Set

clear counters vlan <vlan id>

Use the clear counters vlan command to reset counters on the specified virtual local area network

(VLAN) interface.

Syntax Description

<vlan id> Specifies a valid VLAN interface ID (1 to 4094).

Default Values

No default value necessary for this command.

Applicable Platforms

This command applies to the NetVanta 300, 1000, 1000R, and 2000 Series units.

Command History

Release 5.1 Command was introduced.

Usage Examples

The following example resets the counters on VLAN interface 7:

>enable

#clear counters vlan 7