ADTRAN 1000R Series crypto ike remote-id

Command Reference Guide Global Configuration Mode Command Set

crypto ike remote-id

Use the crypto ike remote-id command to specify the remote ID and to associate a pre-shared key with

the remote ID.

Syntax Description

address

Specifies a remote ID of IPv4 type.

any Wildcard that allows any remote ID (type and value).

asn1-dn

<name>

Specifies an abstract syntax notation distinguished name as

the remote ID (enter this value in LDAP format).

fqdn

<fqdn>

Specifies a fully qualified domain name (e.g., adtran.com) as

the remote ID.

user-fqdn

<fqdn>

S pecifies a user fully q ualified domain name or email a ddress

(e.g., user1@adtran.com) as the remote ID.

preshared-key

Associates a pr es ha re d ke y with this remote ID.

no-mode-config Optional. keyword used to specify that the peer matching this

remote ID should not use mode config.

no-xauth Optiona l. Keyword used to specify that the peer matchin g this

remote ID should not use xauth.

nat-t [v1 l v2] [allow l force I disable] Optional. Keyword that denotes whether peers matching this

remote ID should allo w, disable, or force NAT traversal

versions 1 and 2.

Default Values

There are no default settings for this command.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 4.1 Command was introduced.

Release 5.1 Command was expanded to include the any, asn1-dn, and no-xauth

subcommands.

Release 7.1 Command was expanded to include NAT traversal commands.

For VPN configuration example scripts, refer to the technical support note VPN

Configuration Guide located on the ADTRAN OS Documentation CD provided with

your unit.