Command Reference Guide Common Commands
61200510L1-35E Copyright © 2005 ADTRAN 35

shutdown

Use the shutdown command to disable the interface (both physical and virtual) so that no data will be
passed through. Use the no form of this command to turn on the interface and allow it to pass data. By
default, all interfaces are disabled.
Syntax Description
No subcommands.
Default Values
By default, all interface s ar e disa b led .
Applicable Command Modes
Applies to all interface mode command sets.
Applicable Platforms
Applies to all AOS products.
Command History
Release 1.1 Command was introduced.
Usage Examples
The following example administratively disabl es the mode m interface:
(config)#interface modem 1/2
(config-modem 1/2)#shutdown