ADTRAN 1000R Series debug atm oam <vcd> loopback [end-to-end

Command Reference Guide Enable Mode Command Set

debug atm oam <vcd> loopback [end-to-end | segment] <LLID>

Use the debug atm oam command to display Operation, Administration, and Maintenance (OAM) packets

for an ATM virtual circuit descriptor (VCD). Debug messages are displayed (real time) to the terminal (or

Telnet) screen. Use the no form of this command to disable debug messages.

Variations of this command include the following:

debug atm oam <vcd>

debug atm oam <vcd> loopback [end-to-end | segment]

debug atm oam <vcd> loopback [end-to-end | segment] <LLID>

Syntax Description

<vcd> Shows OAM packets for a specific VCD.

loopback Configures an OAM loopback.

end-to-end Configures an end-to-end OAM loopback.

segment Configures a segment loopback.

<LLID> Specifies 16-byte OAM loopback location ID (LLID).

Default Values

By default, all debug messages in the AOS are disabled.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 3000, and 4000 Series units.

Command History

Release 8.1 Command was introduced.

Usage Examples

The following example activates ATM OAM debug messages for VCD 1:

>enable

#debug atm oam 1