ADTRAN 1000R Series ETHERNET INTERFACE CONFIGURATION COMMAND SET

Command Reference Guide Ethernet Interface Configuration Command Set

ETHERNET INTERFACE CONFIGURATION COMMAND SET

There are four types of Ethernet interfaces associated with the AOS:

• Basic Ethernet interfaces (e.g., eth 0/1)

• Gigabit Ethernet interfaces (e.g., giga-eth 0/3)

• Ethernet sub-interfaces associated with a VLAN (e.g., eth 0/1.1)

• Ethernet interface range (e.g., eth 0/1, 0/8)

To activate the basic Ethernet Interface Configuration mode, enter the interface ethernet command at the

Global Configuration mode prompt . For exa mp l e:

>enable

#configure terminal

(config)#interface ethernet 0/1

(config-eth 0/1)#

To activate the Gigabit Ethernet Interface Configuration mode, enter the interface gigabit-ethernet

command at the Global Configuration mode prompt. For example:

>enable

#configure terminal

(config)#interface gigabit-ethernet 0/3

(config-giga-eth 0/3)#

To activate the Ethernet Sub-Interface Configuration mode, enter the interface etherne t command at the

Global Configuration mode prompt . For exa mp l e:

>enable

#configure terminal

(config)#interface ethernet 0/1.1

(config-eth 0/1.1)#

To activate the Ethernet Configuration mode for a range of Ethernet interfaces, enter the interface range

command at the Global Configuration mode prompt. For example:

>enable

#configure terminal

(config)#interface range ethernet 0/1, 0/8

(config-eth 0/1, 0/8)#