ADTRAN 1000R Series manual reset

Command Reference Guide VLAN Database Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 1170
reset
Use the reset command to dis card all changes made and revert to the previous configuration. The prompt
remains in the VLAN Database.
Syntax Description
No subcommands.
Default Values
No defaults necessary for this setting.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, and 2000 Series units.
Command History
Release 5.1 Command was introduced.
Functional Notes
The reset command discards all changes to the VLAN configuration. The configuration remains the same
as it was prior to entering the VLAN Database Configuration (or since the last time you issued the apply
command). The VLAN Database reverts to the same state it had upon entry. See the command apply on
page 1169 for more information.
Usage Examples
The following example re sets the unit to the previous configuration (i.e., the last config uration sa ve d using
the apply or the exit command):
(config)#vlan database
(vlan)#reset
VLAN configuration has been reset.
(vlan)#