ADTRAN 1000R Series local-id [address | asn1-dn | fqdn

Command Reference Guide IKE Policy Command Set

local-id [address | asn1-dn | fqdn | user-fqdn] <ipaddress or name>

Syntax Description

address

Specifies a remote ID of IPv4 type.

asn1-dn

<name>

Specifies an Abstract Syntax Not ation Distinguished Name as the remote ID

(enter this value in LDAP format).

fqdn

name> Specifies a fully qualified domain name (e.g., adtran.com) as the remote ID.

user-fqdn

name> Specifies a user fully qualified domain name or email address (e.g.,

user1@adtran.com) as the remote ID.

Default Values

By default, the local ID is not defined.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 4.1 Command was introduced.

Functional Notes

The local ID for a particular IKE policy can be set in two ways. The first (default) method is done in the

Global Configuration mode:

(config)#crypto ike local-id address

This command, which by default is executed on start-up, makes the local ID of an IKE policy equal to the

IPv4 address of the interface on which an IKE negotiation is occurring. This is particularly useful for

products that could have multiple public interfaces.

The second method is to use the IKE policy command:

(config-ike)#local-id [address | fqdn | user-fqdn]

This policy-specific command allows you to manually set the local ID for an IKE policy on a per-policy

basis. You can use both methods simultaneously in the product. Several IKE policies can be created, some

of which use the default system setting of the IPv4 address of the public interface. Others can be set to

override this system setting and manually co nfigure a local ID specific to those policies. When a new IKE

policy is created, they default to no local-id. This allows the system local ID setting to be applied to the

policy.