ADTRAN 1000R Series debug port-auth [general | packet [both | rx | tx] | auth -sm | bkend-sm | reauth-sm

Command Reference Guide Enable Mode Command Set

debug port-auth [general | packet [both | rx | tx] | auth -sm | bkend-sm |

Use the debug port-auth command to generate debug me ssages used to aid in troubleshooting problems

during the port authentication process. Debug messages are displayed (real time) on the terminal (or

Telnet) screen. Use the no form of this command to disable the debug messages.

Syntax Description

general Optional. Displays configuration changes to the port authent ica tion syst em .

packet both Optional. Displays packet exchange information in both receive and transmit

directions.

packet rx Optional. Displays packet exchange information in the receive-only direction.

packet tx Optional. Displays packet exchange information in the transmit-only direction.

auth-sm Optional. Displays AuthPAE-state machine information.

bkend Optional. Displays backend-state machine information.

reauth-sm Optional. Displays reauthentication-state machine information.

supp-sm Optional. Displays supplicant-state machine informa tion.

Default Values

By default, all debug messages in the AOS are disabled.

Applicable Platforms

This command applies to the NetVanta 1000, 1000R, 3000, 4000, and 5000 Series units.

Command History

Release 9.1 Command was introduced.

Release 10.1 New options were introduced.

Usage Examples

The following example activates port authentication debug information on received p ackets:

>enable

#debug port-auth pa cket rx

Rcvd EAPOL Start for sess 1 on int eth 0/2