ADTRAN 1000R Series show lldp interface <interface>

Command Reference Guide Enable Mode Command Set

show lldp interface <interface>

Use the show lldp interface command to display local loop demarkation point (LLDP) configuration and

statistics for interfaces on this device.

Syntax Description

<interface> Displays the information for the specified interface. Type show lldp interface ?

for a complete list of applicable interfaces.

Default Values

No default values are necessary for this command.

Applicable Platforms

This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and

Total Access 900 Series units.

Command History

Release 8.1 Command was introduced.

Usage Examples

The following example shows LLDP configuration and statistics for the Ethernet 0/1 interface:

>enable

#show lld p interface ethernet 0/1

eth 0/1 (TX/RX )

0 packets input

0 input errors

0 TLV errors, 0 TLVs Discarded

0 packets discarded

8799 packets output

0 neighbor ageouts