ADTRAN 1000R Series boot config [cflash | flash] <filename> [cflash | flash] <backup filename>

Command Reference Guide Global Configuration Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 347
boot config [cflash | flash] <filename> [cflash | flash] <backup filename>
Use the boot config command to modify system boot parameters.
Syntax Description
cflash Specifies primary/backup configuration file located in CompactFlash memory.
flash Specifies primary/backup configuration file located in flash memory.
<filename> Specifies the filename of the conf igu ra tio n file (filen a me s ar e cas e- se nsitive).
<backup filename> Specifies a name for the backup configuration file.
Default Values
No default is necessary for this command.
Applicable Platforms
This command applies to the NetVanta 1000R, 2000, 3000, 4000 Series units.
Command History
Release 8.1 Command was introduced.
Usage Examples
The following example specifies the file myimage.biz, stored in flash memory, as the startup image:
(config)#boot system flash myimage.biz