ADTRAN 1000R Series debug pppoe client

Command Reference Guide Enable Mode Command Set

debug pppoe client

Use the debug pppoe client command to activate debug messages associated with point-to-point protocol

over Ethernet (PPPoE) operation in the AOS. Debug messages are displayed (real time) to the terminal (or

Telnet) screen. Use the no form of this command to disable the debug messages.

Syntax Description

No subcommands.

Default Values

No default value necessary for this command.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, and 4000 and Total Access 900 Series

units.

Command History

Release 6.1 Command was introduced.

Usage Examples

The following example activates debug messages associated with PPPoE activity:

>enable

#debug pppoe client