ADTRAN 1000R Series

Command Reference Guide Enable Mode Command Set

The following is a list of available extended ping fields with descriptions:

Target IP address: Specifies the IP address of the system to ping.

Repeat Count: Specifies the number of ping packets to send to the system (valid range: 1 to

1,000,000).

Datagram Size: Size (in bytes) of the ping packet (valid range: 1 to 1448).

T imeo ut in Seconds: If a ping response is n ot received within the timeou t period, the ping is considered

unsuccessful (valid range: 1 to 5 seconds).

Extended Commands: Specifies whether additional commands are desired for more ping configuration

parameters.

Source Addres s: Specifies the IP address to use as th e so ur ce add re ss in th e ECHO _REQ (or

interface) packets.

Data Pattern: Specifies an alphanumerical string to use (the ASCII equivalent) as the data

pattern in the ECHO_REQ packets.

Sweep Range of Sizes: Varies the sizes of the ECHO_REQ packets transmitted.

Sweep Min Size: Specifies the minimum size of the ECHO_REQ packet (valid range: 0 to 1488).

Sweep Max Size: Specifies the maximum size of the ECHO_REQ packet (valid range: Sweep Min

Size to 1448).

Sweep Interval: Specifies the interval used to determine packet size when performing the sweep

(valid range: 1 to 1448).

Verbose Output: Specifies an extended results output.

Usage Examples

The following is an example of a successful ping command:

>enable

#ping

Target IP address:192.168.0.30

Repeat count[1-10000 00]:5

Datagram Size [1-1000000]:100

Timeout in seconds [1-5]:2

Extended Commands? [y or n]:n

Type CTRL+C to abort.

Legend: '!' = Success '?' = Unknown host '$' = Invalid host address

'*' = Request timed out '-' = Destination host unreachable

'x' = TTL expired in transit

Pinging 192.168.0.30 with 100 bytes of data:

!!!!!

Success rate is 100 percent (5/5) roun d- tr ip min /a vg / m ax = 19/20.8/25 ms