ADTRAN 1000R Series - page 972

Command Reference Guide HDLC Command Set
61200510L1-35E Copyright © 2005 ADTRAN 972
ip route-cache
Use the ip route-cache command to enable fast-cache switching on the interface. Use the no form of this
command to disable fast-cache switching and return to process switching mode.
Syntax Description
No subcommands.
Default Values
By default, fast-cache switching is enabled on all Ethernet and virtual Frame Relay sub-interfaces. IP
route-cache is enabled for all virtual PPP interfaces.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 3000, 4000, and 5000 and Total Access 900 Series
units.
Command History
Release 9.1 Command was introduced.
Functional Notes
Fast switching allows an IP interface to provide optimum performance when processing IP traffic.
Usage Examples
The following example enables fast switching on the HDLC inter face:
(config)#interface hdlc 1
(config-hdlc 1)#ip route-cache
Using Network Addr ess Translation (NAT) or the AOS fir ewall capabiliti es on an interface
requires process switching mode (using the no ip route-cache command).