Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 197
#show interfaces fr 1
TDM group 10 line protocol is UP
Encapsulation FRAME-RELAY (fr 1)
463 packets input 25488 bytes 0 no buffer
0 runts 0 giants 0 throttles
0 input errors 0 CRC 0 frame
0 abort 0 ignored 0 overr uns
864 packets output 239993 bytes 0 underruns
0 input clock glitches 0 output clock glitches
0 carrier lost 0 cts lost
Line Status: -- No Alarms --
Current Performance Statistics:
0 Errored Seconds 0 Bursty Errored Seconds
0 Severely Errored Seconds 0 Severely Errored Frame Seconds
0 Unavailable Seconds 0 Path Code Violations
0 Line Code Violations 0 Con tr olled Slip Seconds
0 Line Errored Seconds 0 Degraded Minutes
#show interfaces fr 1.100*
fr 1.100 is Active
Ip address is 63.97.45.57 , mask is 255.255.255.248
Interface-dlci is 100
MTU is 1500 bytes, BW is 96000 Kbit (limited)
Average utilization is 53%
*Note: If the user has configured a Bc and Be value on the virtual circuit, the bandwidth (BW) displayed is
the sum of those va lue s (Bc + Be). If not, the value for BW is the speed of the interface. The
Average utilization displayed is the average utilization of the displayed bandwidth. If the bandwidth
number is the Bc + Be value, the (limited) text appears (as shown above).