ADTRAN 1000R Series idle-timeout <seconds>

Command Reference Guide Demand Interface Configuration Command Set

idle-timeout <seconds>

Use the idle-timeout command to set the amount of time the interface link/bundle will remain up in the

absence of interesting traffic. Interesting traffic and direction logic are set using the match-interesting

commands. Refer to match-interesting [list <acl name> | reverse list <acl name >] [in | out] on page 8 28

for more information. Use the no form of this command to restore the default values.

Syntax Description

<seconds> Specifies the number of seconds the interface will remain up in the absence of

interesting traffic. Range is 1 to 2,147,483.

Default Values

By default, idle-timeout is set to 120 seconds.

Applicable Platforms

This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.

Command History

Release 11.1 Command was introduced.

Usage Examples

The following example configu res demand interface 1 to time out after 360 seconds:

(config)#interface demand 1

(config-demand 1)#idle-timeout 360