ADTRAN 1000R Series logging email receiver-ip <ip address>

Command Reference Guide Global Configuration Mode Command Set

logging email receiver-ip <ip address>

Use the logging email receiver-ip command to specify the IP address of the email server to use when

sending notification that an event matched the criteria configured using the logging email priority-level

command. Refer to logging email priority-level [error | fatal | info | notice | warning] on page 464 for

related information. Use the no form of this command to remove a configured address.

Syntax Description

<ip address> Specifies the IP address (in dotted decimal notation) of the mail server to use

when sending logged messages.

Default Values

By default, there are no configured email server addresses.

Applicable Platforms

This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and

Total Access 9 00 Series units.

Command History

Release 1.1 Command was introduced.

Usage Examples

The following example specifies an email server (with address 172.5.67.99) to use when sending logged

messages:

(config)#logging email receiver-ip 172.5.67.99