ADTRAN 1000R Series debug lldp [rx

Command Reference Guide Enable Mode Command Set

debug lldp [rx | tx] verbose

Use the debug lldp co mmand to display debu g output for all local loop demarkation point (LLDP) receive

and transmit packets. Use the no version of this command to disable it. Debug messages are displayed (real

time) on the terminal (or Telnet) screen. Use the no form of this command to disable the debug messages.

Syntax Description

rx Shows information about received packets.

tx Shows information about transmitted packets.

verbose Shows detailed deb ugging information.

Default Values

By default, all debug messages in the AOS are disabled.

Applicable Platforms

This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and

Total Access 900 Series units.

Command History

Release 8.1 Command was introduced.

Usage Examples

The following example activates all possible debug messages associated with LLDP operation:

>enable

#debug lldp rx

#debug lldp tx

#debug lldp verbose