ADTRAN 1000R Series debug frame-relay multilink <interface>

Command Reference Guide Enable Mode Command Set

debug frame-relay multilink <interface>

Use the debug frame-rel ay multilink command to activate debug messages associated with Frame Relay

multilink operation. Debug messages are displayed (real time) to the terminal (or Telnet) screen. Use the

no form of this command to disable the debug messages.

Syntax Description

<interface> Optional. Activates debug messages for the specified interface. Type debug

frame-relay multilink ? for a complete list of applicable interfaces.

Default Values

By default, all debug messages in the AOS are disabled.

Applicable Platforms

This command applies to the NetVanta 1000R, 30 00, 4000, and 5000 and Total Access 900 Series units.

Command History

Release 9.1 Command was introduced.

Usage Examples

The following example activates debug messages associated with multilink operation for all Frame Relay

interfaces:

>enable

#debug frame-relay multilink