ADTRAN 1000R Series show startup-config

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 303
show startup-config
Use the show startup-config command to display a text printout of the startup configuration file stored in
NVRAM.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 1.1 Command was introduced.
Usage Examples
The following is a sample output of the show startup-config command:
>enable
#show startup-config
!
!
no enable password
!
ip subnet-zer o
ip classless
ip routing
!
event-his to ry on
no logging forwarding
logging forwarding priority-level info
no logging email
!
ip policy-timeout tcp all-port s 600
ip policy-timeout udp all-ports 60
ip policy-timeout icmp 60
!