ADTRAN 1000R Series tdm-group <group number> timeslots <1-31> speed [56

Command Reference Guide E1 Interface Configuration Command Set

tdm-group <group number> timeslots <1-31> speed [56 | 64]

Use the tdm-group command to create a group of contiguous channels on this interface to be used during

the cross-connect process. See crypto map <mapname> on page 1045 for related information.

Syntax Description

<group number> Identifies the created TDM group (valid range: 1 to 255).

timeslots <1-31> Specifies the channels to be used in the TDM group. This can be entered as a

single number repr esenting one of the 31 E1 channel timeslots or as a co ntiguous

group of channels. (For example, 1-10 specifies the first 10 channels of the E1.)

speed [56 | 64 ]

Optional. Specifies the individual channel rate on the E1 interface to be 56 kbps or

64 kbps. The default speed is 64 kbp s.

Default Values

By default, there are no configured TDM groups.

Applicable Platforms

This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.

Command History

Release 5.1 Command was introduced.

Usage Examples

The following example creates a TDM group (labeled 5) of 10 DS0s at 64 kbps each:

(config)#interface e1 1/1

(config-e1 1/1)#tdm-group 5 timeslots 1-10 speed 64

Changing tdm-group settings could result in service interruption.