ADTRAN 1000R Series - page 1207

Command Reference Guide VLAN Interface Config Command Set
61200510L1-35E Copyright © 2005 ADTRAN 1207
ip rip send version [1 | 2]
Use the ip rip send version command to configure the RIP version the unit sends in all RIP packets
transmitted on the interface. Use the no form of this command to restore the default value.
Syntax Description
1Transmits only RIP version 1 packets on the interface.
2Transmits only RIP version 2 packets on the interface.
Default Values
By default, all interfaces transmit RIP version 1 (the default value for the version command).
Applicable Platforms
This command applies to the NetVanta 300, 1000R, and 2000 Series units.
Command History
Release 1.1 Command was introduced.
Functional Notes
Use the ip rip send versio n command to specify a RIP version that ov errides the version (in the Router
RIP) configuration. Refer to version [1 | 2] on page 1326 for more information.
The AOS only transmits one version (either 1 or 2) on a given interface.
Usage Examples
The following example configure s the VLAN interface to transmit only RIP version 2 packets:
(config)#interface vlan 1
(config-interface-vlan 1)#ip rip send versi on 2