ADTRAN 1000R Series enable password [md5] <password>

Command Reference Guide Global Configuration Mode Command Set

enable password [md5] <password>

Use the enable password command to define a password (with optional encryption) for accessing the

Enable mode. Use the no enable password command to remove a configured password.

Syntax Description

md5

Optional.

Specifies Message Digest 5 (MD5) as the encryption protocol to use

when displaying the enable password during show commands. If the md5

keyword is not used, encryption is not used when d isplaying the Enable password

during show commands

<password> Specifies the Enable Security mode password using a string (up to 30 characters

in length).

Default Values

By default, there is no configured enable password.

Applicable Platforms

This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and

Total Access 900 Series units.

Command History

Release 1.1 Command was introduced.

To prevent unauthorized users from accessing the configuration functions of your device,

immediately install an Enable-level password.