ADTRAN 1000R Series clear ip igmp group [<group-address>

Command Reference Guide Enable Mode Command Set

clear ip igmp group [<group-address> | <interface>]

Use the clear ip igmp group command to clear entries from the Internet Group Management Protocol

(IGMP) tables. If no address or interface is specified, all non-static IGMP groups are cleared with this

command.

Syntax Description

<group-address>

Optional. Specifies the multicast IP address of the multicast group.

Optional.

esignates the display of parameters for a specific interface (in the format

type slot/port). For example:

eth 0/1

Default Values

No default value necessary for this command.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 3000, 4000, and 5000 and Total Access 900 Series

units.

Command History

Release 7.1 Command was introduced.

Release 9.1 Command was expanded to include HDSL and tunnel interfaces.

Usage Examples

The following example shows output for the show igmp groups command before and after a

clear ip igmp group command is issued. This example clears the IGMP entry that was registered

dynamically by a host. Interfaces that are statically joined are not cleared:

#show ip igmp groups

IGMP Connected Group Membership

Group Address

Interface

Uptime

Expires

Last Reporter

172.0.1.50

Loopback100

01:22:59

00:02:46

172.23.23.1

172.1.1.1

Ethernet0/1