ADTRAN 1000R Series redistribute static [metric <value>]

Command Reference Guide Router (RIP) Configuration Command Set

redistribute static [metric <value>]

Use the redistribute static command to pass routes from one network to another, regardless of the routing

protocol implemente d on the routing domain. Using the static keyword allows the propagation of static

routes to other interfaces using the RIP routing protocol. Use the no form of this command to disable the

propagation of the specified route type.

Syntax Description

metric

<value> Optional. Specifies the hop count to use for advertising redistributed OSPF routes in

RIP.

Default Values

By default, RIP is not enabled.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 1.1 Command was introduced.

Functional Notes

Redistributing static routes allows other network devices to learn about paths (not compatible with their

system) without requiring manual input to each device on the network.

The gateway network for the static route must participate in RIP by using the network

command for the gateway network.