ADTRAN 1000R Series

Command Reference Guide Enable Mode Command Set

Usage Examples

The following is sample output using the show spanning-tree realtime command.

>enable

#show spanning-tree rea lti me

-------------------------------------------------------------------------------------------------

STP 0

Vlan 1

Spanning Tree enabled protocol ieee 802.1w (Rapid Spanning- Tree)

Root ID Priority 8894

Address 00:a0:c8:00:f5:52

Cost 46

Port 1 (giga-eth 0/1)

Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec

Bridge ID Priority 32768

Address 00:a0:c8:02:f6:6b

Aging Time 300

Interface Role Sts Cost Prio.Nbr Type

---------------- ---- --- --------- -------- --------------------------------------------------------

giga-eth 0/1 Root FWD 19 128.1 P2p

giga-eth 0/5 Altn BLK 19 128.5 P2p

-----------------------------------------------------------------------------------------------------

Exit - 'Ctrl-C', Freeze - 'f', Resume - 'r'