ADTRAN 1000R Series route-map <map-name> [ permit

Command Reference Guide Global Configuration Mode Command Set

route-map <map-name> [ permit | deny ] <sequence number>

Use the route-map command to create a route map and enter the Route Map Configuration command set.

A route map is a type of filter that matches various attributes and then performs actions on the way the

route is redistributed. Use the no form of this command to delete a route map.

Syntax Description

<map-name> Specifies a name for the route map.

permit Redistributes routes matching the route map attributes.

deny Specifies not to redistribute routes matching the route map attributes.

<sequence number> Specifies a sequence number of this route entry. Range is 1 to 4,294,967,295.

Default Values

By default, no rout e ma ps are def ine d.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 9.3 Command was introduced.

Functional Notes

Route maps can be assigned to a neighbor using the route-map command in the BGP Neighbor

command set. See route-map <map-name> [in | out] on page 1294 for more information.

Usage Examples

The following example creates the route map, specifies that routes matching its criteria will be denied, and

assigns a sequence number of 100:

(config)#route-map MyMap deny 100

(config-route-map)#

You can then define the attributes of the route map from the Route Map Con figuration Command set. Enter

a ? at the (config-route-map)# prompt to explore the available options.