ADTRAN 1000R Series 318

Command Reference Guide Enable Mode Command Set

Command History

Release 1.1 Command was introduced.

Release 6.1 Command was upda ted to include performance-statistics option.

Release 9.1 Command was expanded to include HDLC and tunnel interfaces.

Release 10.1 The realtime option and PRI inter face were added.

Release 11.1 Description, status, and verbose options were introduced. The demand, FXO, and

serial interfaces were added.

Functional Notes

Use the realtime argument for this command to display full-screen output in real time. Information is

continuously update d on the console until you either freeze the data (by pressing the F key) or exit

realtime mode (by pressing Ctrl-C). If there is not enough room on the screen for all available data, the

information will truncate at the bottom of the screen. In order to maximize the amount of data displayed,

increase the terminal leng th (usin g the terminal length command; refer to terminal length <text> on page

318).

Usage Examples

The following are samples from various show interfaces commands:

>enable

#show interfaces t1 1/1

t1 1/1 is UP

T1 coding is B8ZS framing is ESF

Clock source is line FDL type is ANSI

Line build-out is 0dB

No remote loopbacks No network loopbacks

DS0 Status: 123456789012345678901234

NNNNNNNNNNNNNNNNNNNNNNNN

Line Status: -- No Alarms --

Current Performance Statistics:

0 Errored Seconds 0 Bursty Errored Seconds

0 Severely Errored Seconds 0 Severely Errored Frame Seconds

0 Unavailable Seconds 0 Path Code Violations

0 Line Code Violations 0 Con tr olled Slip Seconds

0 Line Errored Seconds 0 Degraded Minutes