Command Reference Guide ATM Interface Config Command Set
61200510L1-35E Copyright © 2005 ADTRAN 714

ATM INTERFACE CONFIG COMMAND SET

To activate the ATM Interface Configuration mode, enter the interface atm command at the Global
Configuration mode prompt. For example:
>enable
#
configure terminal
(config)#
interface atm 1
(config-atm 1)#
The following comm a nd s are com mo n to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the sections listed below:
alias <“text”> on page 27
cross-connect <#> <from interface> <slot/port> <tdm-group#> <to interface> <slot/port>
on page 28
description <text> on page 31
do on page 32
end on page 33
exit on page 34
shutdown on page 35
All other commands for this command set are described in this section in alphabetical order.
snmp trap on page 715
snmp trap link-status on page 716