ADTRAN 1000R Series debug ip ospf

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 125
debug ip ospf
Use the debug ip ospf command to activate debug messages associated with open shortest path first
(OSPF) routing operations. Debug messages are displayed (real time) to the terminal (or Telnet) screen.
Use the no form of this command to disable the debug messages.
Syntax Description
adj Displays OSPF adjacency events.
database-timer Displays OSPF database timer.
events Displays OSPF events.
flood Displays OSPF flooding.
hello Displays OSPF hello events.
lsa-generation Displays OSPF link state advertisement (LSA) generation.
packet Displays OSPF packets.
retransmission Displays OSPF retransmission events.
spf Displays OSPF shortest-path-first (SPF) calculations.
tree Displays OSPF database tree.
Default Values
By default, all debug messages in the AOS are disabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 3.1 Command was introduced.