ADTRAN 1000R Series switchport port-security mac-address

Command Reference Guide Ethernet Interface Configuration Command Set

switchport port-security mac-address

Use the switchport port-security mac-address command to add a static secure MAC addre ss or sticky

secure MAC address associated with the interface and to enable sticky address learning. Variations of this

command include the following:

switchport port-security mac-address sticky

switchport port-security mac-address sticky <mac address>

switchport port-security mac-address <mac address>

Syntax Description

sticky Adds a sticky secure MAC address associated with this interface. Enables sticky

address learning if a MAC address is not specified.

Default Values

By default, sticky learning is disabled and there are no configured MAC addresses.

Applicable Platforms

This command applies to the NetVanta 300, 1000, and 1000R Series units.

Command History

Release 8.1 Command was introduced.

Usage Examples

The following example adds a single static address and enables sticky address learning on interface

Ethernet interface 0/1:

(config)#interface eth 0/1

(config-eth 0/1)#switchport port-security mac-address 00:A0:C8:02:D0:30

(config-eth 0/1)#switchport port-security mac-address sticky