ADTRAN 1000R Series bridge <group#> protocol ieee

Command Reference Guide Global Configuration Mode Command Set

bridge <group#> protocol ieee

The bridge protocol ieee command configures a bridge group for the IEEE Spanning-Tree Protocol. Use

the no form of this command (with the appropriate arguments) to delete this setting.

Syntax Description

<group#> Specifies a bridge group number (range: 1 to 255).

ieee Specifies IEEE 802.1 Ethernet spanning-tree protocol.

Default Values

By default, all configured bridge interfaces implement ieee spanning-tree protocol.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 3000, 4000, and 5000 and Total Access 900 Series

units.

Command History

Release 1.1 Command was introduced.

Usage Examples

The following example del etes the bridge protocol setting for bridge-group 17:

(config)#no bridge 17 protocol ieee