ADTRAN 1000R Series clear spanning-tree counters [interface <interface id>]

Command Reference Guide Enable Mode Command Set

clear spanning-tree counters [interface <interface id>]

The cl ear sp anning-tre e counters command clears the following counts: BPDU transmit, BPDU receive,

and number of transitions to forwarding state.

Syntax Description

interface <interface id> Optional.

Specifies a single interface. Enter

clear spanning-tree counters ?

for a

complete list of interfaces.

Default Values

No default value necessary for this command.

Applicable Platforms

This command applies to the NetVanta 300, 1000, 1000R, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 6.1 Command was introduced.

Usage Examples

The following example clears the spanning tree counters for Ethernet 0/10:

>enable

#clear spanning-tree counters interface eth 0/10