ADTRAN 1000R Series clear ip route [** | <ip address> <subnet mask>]

Command Reference Guide Enable Mode Command Set

clear ip route [** | <ip address> <subnet mask>]

Use the clear ip route command to remove all learned routes from the IP route table. Stati c and connec ted

routes are not cleared by this command.

Syntax Description

** Deletes all destination routes.

<ip address> Specifies the IP address of the destination routes to be deleted.

<subnet mask> Specifies the subnet mask of th e de stin a t io n ro ut es to be de let ed

Default Values

No default value necessary for this command.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 1.1 Command was introduced.

Usage Examples

The following example removes all lea rned routes from the route table:

>enable

#clear ip route **