ADTRAN 1000R Series snr-margin [showtime monitor

Command Reference Guide ADSL Interface Config Command Set

snr-margin [showtime monitor | training monitor] <margin>

Use the snr-margin command to enable monitoring and set the minimum signal-to-noise ratio (SNR)

during training and showtime. Use the no form of this command to disable monitoring.

Syntax Description

showtime monitor Enables margin monitoring to retrain the ADSL interface if the specified minimum

margin is violated during showtime.

training monitor Enables margin monitoring to retrain the ADSL interface if the specified minimum

margin is violated during training.

<margin> Sets the minimum SNR margin in dB. The range is from 1 to 15.

Default Values

By default, SNR margin monitoring is disabled.

Applicable Platforms

This command ap plies to th e Net Vanta 300, 1000R , 30 00, 40 00 Ser ies un its.

Command History

Release 8.1 Command was introduced.

Usage Examples

The following example enables SNR margin monitoring during showtime with a minimu m level of 7 dB:

(config)#interface adsl 0/1

(config-adsl 0/1)#snr-margin showtime monitor 7