ADTRAN 1000R Series redistribute rip [metric <value> | metric-type <type>

Command Reference Guide Router (OSPF) Configuration Command Set

redistribute rip [metric <value> | metric-type <type> | subnets]

Use the redistribute rip command to advertise routes from one protocol to another, regardless of the

routing protocol implement ed on the routing domain. Using the rip keyword allows the propagatio n of RIP

routes into OSPF. Use the no form of this command to disable the propagation of the specified route ty pe.

Syntax Description

metric <value> Optional. Specifies a metric value to be carried from one OSPF p rocess to the

next (if no other value is specified).

metric-type <type> Optional. S pecifies a type 1 or type 2 external route as the external link type. If not

specified, the default is 2.

subnets Optional. Specifies subnet redistribution when redistributing routes into OSPF.

Default Values

By default, this command is disabled.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 3.1 Command was introduced.

Release 10.1 Subcommands were added.

Functional Notes

Redistributing RIP route s imp o rts those ro utes int o OSPF w ith ou t the inte rf ac es in qu e stio n ac tu ally

participating in OSPF. The RIP routes imported this way are not covered by a network command and

therefore do not send/receive OSPF traffic.

Usage Examples

The following example imports RIP routes into OSPF:

(config)#router ospf

(config-ospf)#redistribute rip