ADTRAN 1000R Series ip default-gateway <ip address>

Command Reference Guide Global Configuration Mode Command Set

ip default-gateway <ip address>

Use the ip default-gateway command to specify a default gateway if (and only if) IP routing is NOT

enabled on the unit. Use the ip route command to add a default route to the route table when using IP

routing functionality.

Syntax Description

<ip address> Specifies the default gateway IP address in the form of dotted decimal notation

(example: 192.22.71.50).

Default Values

By default, there is no configured default-gateway.

Applicable Platforms

This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and

Total Access 9 00 Series units.

Command History

Release 1.1 Command was introduced.

Functional Notes

Only use the ip default-gateway when IP routing is disabled on the router. For all other cases, use the

ip route 0.0.0.0 0.0.0.0 <ip ad dr e ss> command.

Usage Examples

The following example disables IP routing a nd configures a default gateway for 192.22.71.50:

(config)#no ip routing

(config)#ip default-gateway 192.22.71.50