ADTRAN 1000R Series vlan database

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 321
vlan database
Use the vlan database command to enter the VLAN Database Configuration mode. Refer to the section
VLAN Database Configuration Com m and Set on page 1167 for more information.
Syntax Description
No subcommands.
Default Values
No default s necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, and 1000R Series units.
Command History
Release 5.1 Command was introduced.
Usage Examples
The following example enters the VLAN Configuration mode:
>enable
#vlan database