Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 296

show spanning-tree realtime

Use the show spanning-tree realtime command to display full-screen spanning tree information in real
time.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, and 1000R Series units.
Command History
Release 5.1 Command was introduced.
Release 10.1 The real time display option was introduced.
Functional Notes
Use the realtime argument for this command to display full-screen output in real time. Information is
continuously update d on the console until you either freeze the data (by pressing the F key) or exit
realtime mode (by pressing Ctrl-C). If there is not enough room on the screen for all available data, the
information will truncate at the bottom of the screen. In order to maximize the amount of data displayed,
increase the terminal leng th (usin g the terminal length command; refer to terminal length <text> on page
318).