ADTRAN 1000R Series switchport trunk allowed vlan [add | except

Command Reference Guide Port Channel Interface Config Command Set

switchport trunk allowed vlan [add | except | remove] <vlan id list> [all]

Use the switchport trunk allowed vlan command to allow certain VLANs to transmit and receive traffic

on this port when the interface is in trunking mode. To return to defaults, use the no version of this

command.

Syntax Description

add Adds the specified VLAN IDs to the VLAN trunking allowed list.

except Adds all configured VL AN IDs to the VLAN trunking allowed list excep t th os e

specified in the <vlan id list>.

remove Removes VLAN IDs from the VLAN trunking allowed list.

<vlan id list> Specifies a list of valid VLAN interface IDs. Refer to Functional Notes below for

additional syntax considerations.

all Adds all configured VLAN IDs to the VLAN trunking allowed list.

Default Values

By default, all valid VLANs are allowed.

Applicable Platforms

This command applies to the NetVanta 300, 1000, and 1000R Series units.

Command History

Release 5.1 Command was introduced.

Functional Notes

A VLAN list is a set of VLAN IDs. A valid VLAN ID value must be fr om 1 to 4094 (i nclusive). Each VLAN ID

in a list is delimited by comm as, yet a ra ng e of IDs ma y be ex pr es se d as a sin gle elem e nt by usin g a

hyphen between endpoints. For example the VLAN ID range 1,2,3,4,6,7,8,9,500 may be more easily

expresse d as 1-4,6-9,500. No spaces are allowed in a valid ID range.

Usage Examples

The following example adds VLANs to the prev iously existing list of VLANs allowed to transmit and receive

on this port:

(config)#interface port-channel 1

(config-p-chan 1)#switchpo rt trunk allowed vlan add 1-4,7-9,500