ADTRAN 1000R Series ip crypto

Command Reference Guide Global Configuration Mode Command Set

ip crypto

Use the ip crypto command to enable AOS VPN functionality and allow crypto maps to be added to

interfaces. Use the no form of this command to disable the VPN functionality.

Syntax Description

No subcommands.

Default Values

By default, all AOS

VPN functionality is disabled.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 4.1 Command was introduced.

Functional Notes

VPN-related settings will not go into effect until you enable VPN functionality using the ip crypto

command. The AOS

allows you to perform all VPN-related configuration prior to enabling ip crypto, with

the exception of assigning a crypto map to an interface. The no ip crypto command removes all crypto

maps from the inte rfaces. Enabling ip crypto enables the IKE server o n UDP Port 500. The no fo rm of this

command disables the IKE server on UDP Port 500.

Usage Examples

The following example enables VPN functionality:

(config)#ip crypto

Disabling the AOS security featur es (using the no ip crypto command) does not affect VPN

configuration settings (with the exception of the removal of all crypto maps from the

interfaces). All other configuration parameters will remain intact, and VPN functionality

will be disabled.

For VPN configuration example sc ripts, refer to the VPN Configuration Guide located on

the ADTRAN OS Documentation CD provided with your unit.